The whole floor,
cleaned in silence.
Sales floor, fitting rooms, flooring: a shop, a clothing boutique or any retail store must be spotless at every opening. A central vacuum cleans large surfaces from a few inlets, without blowing dust back towards customers: the vacuumed air is never blown back into the sales floor, it is discharged away (a utility room, a ventilated crawl space or outside, depending on the installation). It stays discreet and quiet.
A spotless floor,
at every opening.
Floors to maintain, fitting rooms, dust on displays, cleaning before and after opening: a shop cares about its image. A canister vacuum is cumbersome to move between aisles and blows dust back towards customers.
A central vacuum cleans the sales floor and fitting rooms from a few well-placed inlets, with a retractable hose that tucks out of sight. The hose type — retractable or traditional — is determined on site depending on use. The vacuumed air is never blown back into the sales floor: it is discharged where the central unit sits (a utility room, a ventilated crawl space or outside, depending on the installation), without blowing dust back towards customers. A discreet solution for professional buildings.
Built for
retail
- Large surfaces cleaned from a few inlets
- Air never blown back into the sales floor, discharged away depending on the installation
- Discreet and quiet, even during opening hours
- Hose tucked out of sight, no appliance to wheel around
- A polished image on the sales floor
Integrate it
into the fit-out.
Opening, relocating or renovating your shop: integrate a central vacuum into the fit-out, with inlets distributed across the sales floor and in the fitting rooms, before the coverings.
AspiWall studies the shop plan, distributes inlets to cover the whole sales floor and places the central unit in the storeroom, in a utility area. The duct network stays invisible behind the fit-out.
Cover the whole floor
- → Inlets distributed across the sales floor
- → Inlet in (or near) each fitting room
- → Storeroom turned into a utility area
- → Ducts built in before the fit-out
Where does
the air go?
A standard vacuum, a robot or a stick vacuum filters part of the dust but blows the air back into the room where it runs. With an AspiWall central vacuum, the dirt is sent to the central unit and the vacuumed air is expelled out of the living areas or out of the occupied zones, which limits the re-suspension of fine dust. That is what makes the difference in buildings open to the public and places sensitive to dust.
A benchmark for
air quality.
AspiWall offers central units in Belgium made by Trovac, among other manufacturers. Trovac's central vacuum system has been distinguished by AFPRAL (the French Association for Allergy Prevention) since July 2014. An important reference for buildings where air quality, dust, dust mites and allergens are sensitive matters.
A visible argument
for your clients.
Your establishment can promote this installation as a real plus: AspiWall central vacuum system, made by Trovac — among other manufacturers —, a manufacturer distinguished by AFPRAL. The vacuumed air is expelled out of the occupied areas, which limits the re-suspension of fine dust, dust mites and allergens.
« Establishment equipped with an AspiWall central vacuum system, made by Trovac. The vacuumed air is expelled out of the occupied areas to limit the re-suspension of fine dust, dust mites and allergens. »
Yes. A single central unit serves the whole shop via the duct network, with inlets distributed to reach the entire floor from a few points. AspiWall sizes the central unit to the square metres and the layout of the aisles.
Yes. With the motor remote in the storeroom, cleaning is almost silent, without the roar of a canister vacuum in front of customers. The hose then tucks out of sight.
No. The vacuumed air is never blown back into the sales floor: it is discharged where the central unit sits (a utility room, a ventilated crawl space or outside, depending on the installation). This avoids blowing fine dust back towards customers and displays, unlike a standard vacuum.
Yes. By planning an inlet in or near each fitting room, you clean floors and corners quickly between customers, for always-tidy rooms — a detail that matters for the shop's image.
Yes. Contact AspiWall for a feasibility study based on the surface and layout of your shop.
An always-spotless shop?
AspiWall studies your shop and installs your central vacuum across Belgium. +32 470 71 22 22 · info@AspiWall.be